Description
Details Slim Curved LED Bar EPIX21 21″ 108W Ledson:
The Epix21 Slim Curved has been carefully designed to harmonize with modern vehicles that have a slightly curved front, allowing the curved design of the bar to perfectly follow the lines of the vehicle. The light pattern will also be slightly wider towards the sides of the road, compared to a traditionally straight bar. Compact size perfect for those who demand performance without sacrificing aesthetics.
Pulse-controlled powerboostWrist-controlled
powerboostThe Epix21 Slim Curved comes equipped with Ledson Powerboost – an extra power mode for those times when you need (or just want) maximum brightness. A simple press of the maximum headlight lever activates this impressive glow, so you can easily adjust the amount of auxiliary light light as needed.
Driving Beam (Drive)
Light PatternThe Epix21 Slim Curved brings the advanced Driving Beam light pattern of previous Epix models. Each reflector is carefully designed to mimic and enhance the car’s existing headlights and lights, providing an ideal light pattern for the road ahead.
Features:
- Curved design (approximately 5°) to suit a curved front
- Direction beam light pattern (slightly wider light towards a straight ramp)
- Marking E R148, R149 (Ref. No. 50), R10 (EMC rating)
- Range: 462 m (1 lux), Powerboost: 502 m (1 lux)
- 9600 lumens (theoretical), 7500 lumens (real)
- Color Temperature 5000K (Neutral White)
Technical data:
- 108 W (18 x 6 W LEDs)
- IP69K (water/dustproof)
- Aluminum housing and polycarbonate lens
- Pressure equalization diaphragm
- Electronic Heat Management
- Side Reflection Optics
- Voltage: 9-36V
- Warranty: 36 months
Included:
- 21″ Epix21 Slim Curved LED Bar
- Bolts and nuts to secure the ramp to a suitable surface
- Assembly Details for Final Assembly
- Mounting Details for Rear, Vertical/Overhead Mounting
- 2-pin DT connector
- Installation Instructions
Dimensions and weight (excluding brackets):
- Width: 542mm x Height: 33mm x Depth: 59mm
- Weight: 1.1kg
Observations:
- The DT connector must not be cut as this increases the risk of moisture damage and will void the warranty.
- It can be mounted directly on the vehicle (drill in the appropriate place) or a little easier and more elegantly using a license plate holder.
Powerboost Mode:
- The easiest way to change the position is with the auxiliary lights on, the vehicle’s high beam lever and the light switch in position 0 or parking lights.
- Turn on the auxiliary light for about 10 seconds (between 7 and 13 seconds)
- Flash the auxiliary light quickly 10 times (within 10 seconds)
- On the eleventh flash, keep the light on and after about 5 seconds the Powerboost function will automatically turn on or off.
If you need more information about this product please contact us through our contact page.
To see all the lighting products we have available in our store click here.
